......................................................................
  TEAR DROP FUEL CELL

32-Gallon in a red powder coated steel can, 24-3/4" wide, fits all popular chassis including Dirt Works. This fuel cell has a #10 pick up, #8 vent and return, tip over valve and dipstick access. Available with a variety of caps and fillers or with filler shown.

The 32 Gal. Tear Drop Fuel Cell comes with different cap assemblies:

274-632-06 32 GAL. TEAR DROP W/ STRAIGHT FAST FILL W/ CAP
275-632-06 32 GAL. TEAR DROP W/ STEEL CAP
276-632-06 32 GAL. TEAR DROP W/ PLASTIC CAP
280-632-06 32 GAL. TEAR DROP W/ 45-DEGREE FAST FILL 2-1/2"
281-632-06 32 GAL. TEAR DROP W/ 45-DEGREE FAST FILL 2-1/4"
282-632-06 32 GAL. TEAR DROP W/ STRAIGHT FAST FILL 2-1/4"
283-632-06 32 GAL. TEAR DROP W/ STRAIGHT FAST FILL 2-1/2"

Size: 32 Gallon | Length: 24-3/4"

Width: 23" | Depth: 20"

....................................................................

TEAR DROP MOUNT KIT
PART # 400-632-03
32 GAL. 632 TEAR DROP CELL MOUNT KIT

....................................................................



PROTECTO ULTRA CASEPART # 700-008-06

Classic JAZ design made to fit an Ultra Case. Available in red only. This is a better way to store Third Members, keeps them safe and clean. Built in handles for easy carrying. Stackable in any direction for multiple storage.

.............................................................

Call now for your free catalog:

800-525-8133

or just request one here!

 
 

FLAPPER / FILL VALVE W/ STEEL CAP

PART #390-004-01

This fill valve is cast aluminum and has the standard JAZ 12-bolt hole pattern so it can be used on any JAZ 12-bolt fuel cell. Has a large 4" diameter bail handled steel cap for quick removal and easy filling. Features a spring loaded Flapper for roll over protection. One of the 12 mounting holes is hollow with an easily removable cap for checking fuel level in your fuel cell. IMCA acceptable.
...........................................................

FLAPPER / FILL VALVE W/ PLASTIC CAP

PART #390-004-06

Has the same features as part #390-004-01, the only difference is the cap is Molded Plastic.
...........................................................

ALUMINUM BAT WING

PART #305-051-03

Designed to keep Fuel pick-up hose in lower corner of fuel cell. Must be used with foam to function properly. This bat wing is made from aluminum and has a -8 Barbed end.

PART #305-052-03

Has the same features as part # 305-051-03 except this bat wing features a -10 Barbed end.

...........................................................