Fuel Cell Mounts
Fender Filler Kit
Fuel Filler Hose
Bat-Wing Pickup
Fast Fill Valve
Fuel Cell Caps
Flush Mount Cap
Straight Filler Neck
Fuel Level Sending Unit
Fuel Cell Foam
Extended Filler Necks


FUEL CELL MOUNTS
Application Part # Application Part #
-050 Cells #400-050-03 -008 Cells #400-008-03
-001 Cells #400-001-03 -010 Cells #400-010-03
-002 Cells #400-002-03 -012 Cells #400-012-03
-202 Cells #400-202-03 -016 Cells #400-016-03
-003 Cells #400-003-03 -116 Cells #400-116-03
-203 Cells #400-203-03 -022 Cells #400-022-03
-303 Cells #400-303-03 -122 Cells #400-122-03
-004 Cells #400-004-03 -222 Cells #400-222-03
-005 Cells #400-005-03 -032 Cells #400-032-03
-105 Cells #400-105-03 -132 Cells #400-132-03

FENDER FILLER KIT
  • To be used with remote fill fuel cells
  • Can be adapted to other brands of cells
  • Recessed fender filler cap flange
  • Bright Zinc plated steel
  • Vented twist lock cap assembly
  • 3 feet of clear fuel approved filler hose
  • AN-8 to 1/2" hose barb fitting for vent line
  • 3 feet of 1/2" clear vent line hose
  • Application Part #
    6 bolt hole 2-1/4" filler kit #300-001-20
    12 bolt hole 2-1/2" filler kit #300-000-20

    FUEL FILLER HOSE
  • Clear fuel approved filler hose
  • Available in 2-1/4" or 2-1/2" diameter
  • Sold in three foot lengths
  • Replacement item for fender filler kit
  • Application Part #
    2-1/4" diameter filler hose #300-225-00
    2-1/2" diameter filler hose #300-250-00

    BAT-WING PICKUP
  • Designed to keep fuel pickup hose in place
  • Keeps pickup hose in lower corner of fuel cell
  • Designed to be used with 1/2" diameter hose
  • Must be used with foam to function properly
  • Application Part #
    Bat-Wing pickup #305-050-01

    FAST FILL VALVE
  • Cast aluminum filler replaces 12 bolt d-ring caps
  • Features a spring loaded flapper for roll over protection
  • Available in straight or 45 degree styles
  • Filler neck available in 2-1/4" and 2-1/2" diameters
  • Gaskets and bolt rings sold separately

  • Application Part #
    45 degree 2-1/4" filler valve #345-225-03
    45 degree 2-1/2" filler valve #345-250-03
    Straight 2-1/4" filler valve #390-225-03
    Straight 2-1/2" filler valve #390-250-03
    Split nut ring (required) #315-030-03
    Replacement flange gasket #850-301-01

    FAST FILL VALVE with CAP
    • Designed to replace 12 bolt D-ring cap assembly
    • Cast aluminum with spring loaded flapper valve
    • Straight style neck with vented twist lock cap
    Application Part #
    Straight fast fill valve with cap #391-250-03
    Split nut ring (Required) #315-030-03
    Replacement flange gasket #850-301-01


    FUEL CELL CAPS
  • Replacement caps for fuel cells
  • Can be used for custom cell constuction
  • Assemblies come with all hardware and gasket
  • All cap assemblies feature one way check valve vent

  • Application Part #
    6 hole flush mount assembly #350-201-06
    6 hole replacement cap only #340-200-06
    12 hole D-Ring cap assembly #350-301-03
    12 hole D-Ring replacement cap #340-300-09


    STRAIGHT FILLER NECK
  • 2-1/2" diameter with vented twist lock cap
  • Application Part #
    Filler neck assembly with cap #350-251-03
    Replacement cap only #340-250-03

    FUEL LEVEL SENDING UNIT
    Application Part #
    70-10 ohm Ford/Chrysler 8-1/2" long #378-070-03
    70-10 ohm Ford/Chrysler 11" long #371-070-03
    0-90 ohm General Motors 8-1/2" long #378-090-03
    0-90 ohm General Motors 11" long #371-090-03
    240-33 ohm Universal 8-1/2" long #378-240-03
    240-33 ohm Universal 11" long #371-240-03

    FUEL CELL FOAM
    Application Part # Application Part #
    -001 cells #360-001-11 -008 cells #360-008-11
    -002 cells #360-002-11 -010 cells #360-010-11
    -202 cells #360-202-11 -012 cells #360-012-11
    -003 cells #360-003-11 -016 cells #360-016-11
    -103 cells #360-103-11 -116 cells #360-116-11
    -203 cells #360-203-11 -022 cells #360-022-11
    -303 cells #360-303-11 -122 cells #360-122-11
    -004 cells #360-004-11 -222 cells #360-222-11
    -104 cells #360-104-11 -032 cells #360-032-11
    -005 cells #360-005-11 -132 cells #360-132-11
    -105 cells #360-105-11    

    EXTENDED FILLER NECK
  • A direct replacement for 6 bolt flush mount caps
  • Great for dragsters with behind seat fuel cells
  • Available in straight or 45° styles
  • Short styles are approximately 4" long
  • Long styles are approximately 8" long
  • Comes complete with all hardware and gasket
  • Application Part #
    45° short filler neck assembly #345-251-03
    45° long filler neck assembly #345-252-03
    Straight short filler assembly #390-251-03
    Straight long filler assembly #390-252-03
    Replacement cap only #340-250-03

    5 BOLT FLAPPER VALVE
    • Helps prevent fuel spills in the event of a roll over
    • Mounts under standard 12 bolt D-ring cap assembly
    • All hardware and instructions included
    Application Part #
    5 Bolt Flapper Assembly #315-105-03

    RECESSED CAP ASSEMBLIES
    • 2 1/4" style features small 6 bolt flange
    • 2 1/2" style feature large 12 bolt flange
    • Bright Cadmium Plated Steel
    • Designed to be mounted in the side of vehicle
    • Can use split nut rings for mounting
    Application Part #
    2 1/4" Hose Recessed Cap Assembly #350-225-03
    2 1/2" Hose Recessed Cap Assembly #350-250-03
    Replacement Cap for 2 1/4" #340-025-03
    Replacement Cap for 2 1/2" #340-250-03
    6 Bolt Split Nut Ring #315-003-03
    12 Bolt Split Nut Ring #315-040-03

    SPLIT NUT RINGS
    • Required for fast fill valve
    • Nut rings come complete with hardware and gasket
    Application Part #
    6 bolt split nut ring #315-003-03
    12 bolt split nut ring #315-030-03
    12 bolt ring for recessed cap #315-040-03